| Index |
Identifier |
Field Type |
Field Length |
Description |
Units |
| 0 |
"first_zero_doppler_time" |
MJD |
1 |
First Zero Doppler Azimuth time of MDS which this data set describesTime of first range line in the MDS
described by this data set |
MJD |
| 1 |
"attach_flag" |
UChar |
1 |
Attachment Flag (always set to zero for this ADSR) |
flag |
| 2 |
"last_zero_doppler_time" |
MJD |
1 |
Last Zero Doppler Azimuth time of MDS which this data set describesTime of last range line in the MDS described
by this data set |
MJD |
| 3 |
"work_order_id" |
String |
1 |
Work Order ID (left-justified) |
ascii |
| 4 |
"time_diff" |
Float |
1 |
Time difference between sensing time of first input line and zero Doppler time of first output image line
(tdelta). (TBC)May be used during child product extraction from a stripline product (TBC). Left blank (set to
zero) for non-stripline products |
s |
| 5 |
"swath_id" |
String |
1 |
Swath number IS1, IS2, IS3, IS4, IS5, IS6, or IS7 for IM, WV and AP modes.Set to WSØ for WS and GM
modes |
ascii |
| 6 |
"range_spacing" |
Float |
1 |
Range sample spacing |
m |
| 7 |
"azimuth_spacing" |
Float |
1 |
Azimuth sample spacing at image center |
m |
| 8 |
"line_time_interval" |
Float |
1 |
Azimuth sample spacing in time (Line Time Interval) |
s |
| 9 |
"num_output_lines" |
ULong |
1 |
Number of output range lines in the image described by this ADS |
lines |
| 10 |
"num_samples_per_line" |
ULong |
1 |
Number of samples per output range line (includes zero filled samples) |
samples |
| 11 |
"data_type" |
String |
1 |
Output data typeSWORD, UWORD, or UBYTE |
ascii |
| 12 |
"spare_1" |
Spare |
1 |
Spare |
- |
| 13 |
"data_analysis_flag" |
UChar |
1 |
Raw Data Analysis used for Raw Data Correction 0 = correction done using default parameters1 = correction done
using raw data analysis results |
flag |
| 14 |
"ant_elev_corr_flag" |
UChar |
1 |
Antenna Elevation Pattern Correction Applied 0 = no correction applied1 = correction applied |
flag |
| 15 |
"chirp_extract_flag" |
UChar |
1 |
reconstructed Chirp used 0 = nominal chirp replica used1 = reconstructed chirp used |
flag |
| 16 |
"srgr_flag" |
UChar |
1 |
Slant Range to Ground Range Conversion Applied0 = no conversion applied1 = conversion applied |
flag |
| 17 |
"dop_cen_flag" |
UChar |
1 |
Doppler Centroid Estimation Performed0 = no estimation done1 = estimation done |
flag |
| 18 |
"dop_amb_flag" |
UChar |
1 |
Doppler Ambiguity Estimation Performed0 = no estimate done1 = estimate done |
flag |
| 19 |
"range_spread_comp_flag" |
UChar |
1 |
Range-spreading loss compensation Applied0 = no compensation applied1 = compensation applied |
flag |
| 20 |
"detected_flag" |
UChar |
1 |
Detection Applied0 = output product is complex1 = output product was detected |
flag |
| 21 |
"look_sum_flag" |
UChar |
1 |
Look Summation Performed0 = product is single look1 = product is multi-looked |
flag |
| 22 |
"rms_equal_flag" |
UChar |
1 |
RMS Equalization performed 0= rms equalization not performed during FBAQ decoding, 1 = rms equalization
performed during FBAQ decoding |
flag |
| 23 |
"ant_scal_flag" |
UChar |
1 |
Antenna Elevationscaling Factor applied 0= no scaling factor applied, 1 = scaling factor applied |
flag |
| 24 |
"spare_2" |
Spare |
1 |
Spare |
- |
| 25 |
"raw_data_analysis.1.num_gaps" |
ULong |
1 |
Number of input data gaps (a gap is defined as a predetermined number of range lines) (record 1) |
gaps |
| 26 |
"raw_data_analysis.1.num_missing_lines" |
ULong |
1 |
Number of missing lines, excluding data gaps (record 1) |
lines |
| 27 |
"raw_data_analysis.1.range_samp_skip" |
ULong |
1 |
Range sample skipping factor for raw data analysis (record 1) |
samples |
| 28 |
"raw_data_analysis.1.range_lines_skip" |
ULong |
1 |
Range lines skipping factor for raw data analysis (record 1) |
lines |
| 29 |
"raw_data_analysis.1.calc_i_bias" |
Float |
1 |
Calculated I channel bias (record 1) |
- |
| 30 |
"raw_data_analysis.1.calc_q_bias" |
Float |
1 |
Calculated Q channel bias (record 1) |
- |
| 31 |
"raw_data_analysis.1.calc_i_std_dev" |
Float |
1 |
Calculated I channel standard deviation (record 1) |
- |
| 32 |
"raw_data_analysis.1.calc_q_std_dev" |
Float |
1 |
Calculated Q channel standard deviation (record 1) |
- |
| 33 |
"raw_data_analysis.1.calc_gain" |
Float |
1 |
Calculated I/Q gain imbalance (record 1) |
- |
| 34 |
"raw_data_analysis.1.calc_quad" |
Float |
1 |
Calculated I/Q quadrature departure (record 1) |
- |
| 35 |
"raw_data_analysis.1.i_bias_max" |
Float |
1 |
I bias upper bound (record 1) |
- |
| 36 |
"raw_data_analysis.1.i_bias_min" |
Float |
1 |
I bias lower bound (record 1) |
- |
| 37 |
"raw_data_analysis.1.q_bias_max" |
Float |
1 |
Q bias upper bound (record 1) |
- |
| 38 |
"raw_data_analysis.1.q_bias_min" |
Float |
1 |
Q bias lower bound (record 1) |
- |
| 39 |
"raw_data_analysis.1.gain_min" |
Float |
1 |
I/Q gain lower bound (record 1) |
- |
| 40 |
"raw_data_analysis.1.gain_max" |
Float |
1 |
I/Q gain upper bound (record 1) |
- |
| 41 |
"raw_data_analysis.1.quad_min" |
Float |
1 |
I/Q quadrature departure lower bound (record 1) |
- |
| 42 |
"raw_data_analysis.1.quad_max" |
Float |
1 |
I/Q quadrature departure upper bound (record 1) |
- |
| 43 |
"raw_data_analysis.1.i_bias_flag" |
UChar |
1 |
I bias significance0 = I bias falls within acceptable range1 = I bias falls outside acceptable range (record
1) |
flag |
| 44 |
"raw_data_analysis.1.q_bias_flag" |
UChar |
1 |
Q bias Significance0 = Q bias falls within acceptable range1 = Q bias falls outside acceptable range (record
1) |
flag |
| 45 |
"raw_data_analysis.1.gain_flag" |
UChar |
1 |
I/Q Gain Significance0 = Gain falls within acceptable range1 = Gain falls outside acceptable range (record
1) |
flag |
| 46 |
"raw_data_analysis.1.quad_flag" |
UChar |
1 |
I/Q Quadrature Departure Significance0 = Quadrature departure falls within acceptable range1 =Quadrature
departure falls outside acceptable range (record 1) |
flag |
| 47 |
"raw_data_analysis.1.used_i_bias" |
Float |
1 |
I channel bias used for correction (may be different from measured value) (record 1) |
- |
| 48 |
"raw_data_analysis.1.used_q_bias" |
Float |
1 |
Q channel bias used for correction(may be different from measured value) (record 1) |
- |
| 49 |
"raw_data_analysis.1.used_gain" |
Float |
1 |
I/Q gain imbalance used for correction(may be different from measured value) (record 1) |
- |
| 50 |
"raw_data_analysis.1.used_quad" |
Float |
1 |
I/Q quadrature departure used for correction(may be different from measured value) (record 1) |
- |
| 51 |
"raw_data_analysis.2.num_gaps" |
ULong |
1 |
Number of input data gaps (a gap is defined as a predetermined number of range lines) (record 2) |
gaps |
| 52 |
"raw_data_analysis.2.num_missing_lines" |
ULong |
1 |
Number of missing lines, excluding data gaps (record 2) |
lines |
| 53 |
"raw_data_analysis.2.range_samp_skip" |
ULong |
1 |
Range sample skipping factor for raw data analysis (record 2) |
samples |
| 54 |
"raw_data_analysis.2.range_lines_skip" |
ULong |
1 |
Range lines skipping factor for raw data analysis (record 2) |
lines |
| 55 |
"raw_data_analysis.2.calc_i_bias" |
Float |
1 |
Calculated I channel bias (record 2) |
- |
| 56 |
"raw_data_analysis.2.calc_q_bias" |
Float |
1 |
Calculated Q channel bias (record 2) |
- |
| 57 |
"raw_data_analysis.2.calc_i_std_dev" |
Float |
1 |
Calculated I channel standard deviation (record 2) |
- |
| 58 |
"raw_data_analysis.2.calc_q_std_dev" |
Float |
1 |
Calculated Q channel standard deviation (record 2) |
- |
| 59 |
"raw_data_analysis.2.calc_gain" |
Float |
1 |
Calculated I/Q gain imbalance (record 2) |
- |
| 60 |
"raw_data_analysis.2.calc_quad" |
Float |
1 |
Calculated I/Q quadrature departure (record 2) |
- |
| 61 |
"raw_data_analysis.2.i_bias_max" |
Float |
1 |
I bias upper bound (record 2) |
- |
| 62 |
"raw_data_analysis.2.i_bias_min" |
Float |
1 |
I bias lower bound (record 2) |
- |
| 63 |
"raw_data_analysis.2.q_bias_max" |
Float |
1 |
Q bias upper bound (record 2) |
- |
| 64 |
"raw_data_analysis.2.q_bias_min" |
Float |
1 |
Q bias lower bound (record 2) |
- |
| 65 |
"raw_data_analysis.2.gain_min" |
Float |
1 |
I/Q gain lower bound (record 2) |
- |
| 66 |
"raw_data_analysis.2.gain_max" |
Float |
1 |
I/Q gain upper bound (record 2) |
- |
| 67 |
"raw_data_analysis.2.quad_min" |
Float |
1 |
I/Q quadrature departure lower bound (record 2) |
- |
| 68 |
"raw_data_analysis.2.quad_max" |
Float |
1 |
I/Q quadrature departure upper bound (record 2) |
- |
| 69 |
"raw_data_analysis.2.i_bias_flag" |
UChar |
1 |
I bias significance0 = I bias falls within acceptable range1 = I bias falls outside acceptable range (record
2) |
flag |
| 70 |
"raw_data_analysis.2.q_bias_flag" |
UChar |
1 |
Q bias Significance0 = Q bias falls within acceptable range1 = Q bias falls outside acceptable range (record
2) |
flag |
| 71 |
"raw_data_analysis.2.gain_flag" |
UChar |
1 |
I/Q Gain Significance0 = Gain falls within acceptable range1 = Gain falls outside acceptable range (record
2) |
flag |
| 72 |
"raw_data_analysis.2.quad_flag" |
UChar |
1 |
I/Q Quadrature Departure Significance0 = Quadrature departure falls within acceptable range1 =Quadrature
departure falls outside acceptable range (record 2) |
flag |
| 73 |
"raw_data_analysis.2.used_i_bias" |
Float |
1 |
I channel bias used for correction (may be different from measured value) (record 2) |
- |
| 74 |
"raw_data_analysis.2.used_q_bias" |
Float |
1 |
Q channel bias used for correction(may be different from measured value) (record 2) |
- |
| 75 |
"raw_data_analysis.2.used_gain" |
Float |
1 |
I/Q gain imbalance used for correction(may be different from measured value) (record 2) |
- |
| 76 |
"raw_data_analysis.2.used_quad" |
Float |
1 |
I/Q quadrature departure used for correction(may be different from measured value) (record 2) |
- |
| 77 |
"spare_3" |
Spare |
1 |
Spare |
- |
| 78 |
"start_time.1.first_obt" |
ULong |
2 |
On-board binary time of first input line processedLSB accurate to 15.26 ms. (Contained in two long integers)
(record 1) |
- |
| 79 |
"start_time.1.first_mjd" |
MJD |
1 |
Sensing time (MJD format) of first input line processedconverted from satellite binary time (record 1) |
MJD |
| 80 |
"start_time.2.first_obt" |
ULong |
2 |
On-board binary time of first input line processedLSB accurate to 15.26 ms. (Contained in two long integers)
(record 2) |
- |
| 81 |
"start_time.2.first_mjd" |
MJD |
1 |
Sensing time (MJD format) of first input line processedconverted from satellite binary time (record 2) |
MJD |
| 82 |
"parameter_codes.swst_code" |
UShort |
5 |
Sampling Window Start time code of first processed line |
code |
| 83 |
"parameter_codes.last_swst_code" |
UShort |
5 |
Sampling Window Start time code of last processed line |
code |
| 84 |
"parameter_codes.pri_code" |
UShort |
5 |
Pulse Repetition Interval code |
code |
| 85 |
"parameter_codes.tx_pulse_len_code" |
UShort |
5 |
Tx pulse length |
code |
| 86 |
"parameter_codes.tx_bw_code" |
UShort |
5 |
Tx pulse bandwidth |
code |
| 87 |
"parameter_codes.echo_win_len_code" |
UShort |
5 |
Echo Window Length |
code |
| 88 |
"parameter_codes.up_code" |
UShort |
5 |
Upconverter Level - Upconverter gain set on the instrument |
code |
| 89 |
"parameter_codes.down_code" |
UShort |
5 |
Downconverter Level - Downconverter gain set on the instrument |
code |
| 90 |
"parameter_codes.resamp_code" |
UShort |
5 |
Resampling factor for echo data |
code |
| 91 |
"parameter_codes.beam_adj_code" |
UShort |
5 |
Beam adjustment delta |
code |
| 92 |
"parameter_codes.beam_set_num_code" |
UShort |
5 |
Antenna Beam Set Number |
code |
| 93 |
"parameter_codes.tx_monitor_code" |
UShort |
5 |
Auxiliary Tx Monitor Level |
code |
| 94 |
"spare_4" |
Spare |
1 |
Spare |
- |
| 95 |
"error_counters.num_err_swst" |
ULong |
1 |
Number of errors detected in Sampling Window start time field. |
- |
| 96 |
"error_counters.num_err_pri" |
ULong |
1 |
Number of errors detected in PRI code field |
- |
| 97 |
"error_counters.num_err_tx_pulse_len" |
ULong |
1 |
Number of errors detected in Tx pulse length field |
- |
| 98 |
"error_counters.num_err_tx_pulse_bw" |
ULong |
1 |
Number of errors detected in Tx pulse bandwidth field. |
- |
| 99 |
"error_counters.num_err_echo_win_len" |
ULong |
1 |
Number of errors detected in Echo Window Length field. |
- |
| 100 |
"error_counters.num_err_up" |
ULong |
1 |
Number of errors detected in Upconverter Level field. |
- |
| 101 |
"error_counters.num_err_down" |
ULong |
1 |
Number of errors detected in Downconverter Level field. |
- |
| 102 |
"error_counters.num_err_resamp" |
ULong |
1 |
Number of errors detected in Resampling factor for echo data field. |
- |
| 103 |
"error_counters.num_err_beam_adj" |
ULong |
1 |
Number of errors detected in Beam adjustment delta field. |
- |
| 104 |
"error_counters.num_err_beam_set_num" |
ULong |
1 |
Number of errors detected in Antenna Beam Set Number field. |
- |
| 105 |
"spare_5" |
Spare |
1 |
Spare |
- |
| 106 |
"image_parameters.swst_value" |
Float |
5 |
Sampling Window Start time of first processed line |
s |
| 107 |
"image_parameters.last_swst_value" |
Float |
5 |
Sampling Window Start time of last processed line |
s |
| 108 |
"image_parameters.swst_changes" |
ULong |
5 |
Number of Sample Window Start Time changes within a beam |
- |
| 109 |
"image_parameters.prf_value" |
Float |
5 |
Pulse Repetition Frequency |
Hz |
| 110 |
"image_parameters.tx_pulse_len_value" |
Float |
5 |
Tx pulse length |
s |
| 111 |
"image_parameters.tx_pulse_bw_value" |
Float |
5 |
Tx pulse bandwidth |
Hz |
| 112 |
"image_parameters.echo_win_len_value" |
Float |
5 |
Echo Window Length |
s |
| 113 |
"image_parameters.up_value" |
Float |
5 |
Upconverter Level - Upconverter gain set on the instrument |
dB |
| 114 |
"image_parameters.down_value" |
Float |
5 |
Downconverter Level - Downconverter gain set on the instrument |
dB |
| 115 |
"image_parameters.resamp_value" |
Float |
5 |
Resampling factor |
- |
| 116 |
"image_parameters.beam_adj_value" |
Float |
5 |
Beam adjustment delta |
deg. |
| 117 |
"image_parameters.beam_set_value" |
UShort |
5 |
Antenna Beam Set Number |
- |
| 118 |
"image_parameters.tx_monitor_value" |
Float |
5 |
Auxiliary Tx Monitor Level |
- |
| 119 |
"spare_6" |
Spare |
1 |
Spare |
- |
| 120 |
"first_proc_range_samp" |
ULong |
1 |
First processed input range sample, first sample is 1 |
samples |
| 121 |
"range_ref" |
Float |
1 |
Range spreading loss reference range |
m |
| 122 |
"range_samp_rate" |
Float |
1 |
Range sampling rate |
Hz |
| 123 |
"radar_freq" |
Float |
1 |
Radar Frequency |
Hz |
| 124 |
"num_looks_range" |
UShort |
1 |
Number of range looks |
looks |
| 125 |
"filter_range" |
String |
1 |
Matched filter window type:HAMMING or KAISERØ or NONEØØØ |
ascii |
| 126 |
"filter_coef_range" |
Float |
1 |
Window coefficient for range-matched filter |
- |
| 127 |
"bandwidth.look_bw_range" |
Float |
5 |
Range Look Bandwidth (null to null) |
Hz |
| 128 |
"bandwidth.tot_bw_range" |
Float |
5 |
Total processed range bandwidth (null to null) |
Hz |
| 129 |
"nominal_chirp.1.nom_chirp_amp" |
Float |
4 |
4 nominal chirp amplitude coefficients (record 1) |
-, s-1, s-2, s-3 |
| 130 |
"nominal_chirp.1.nom_chirp_phs" |
Float |
4 |
4 nominal chirp phase coefficients (record 1) |
cycles,Hz,Hz/s,Hz/s2 |
| 131 |
"nominal_chirp.2.nom_chirp_amp" |
Float |
4 |
4 nominal chirp amplitude coefficients (record 2) |
-, s-1, s-2, s-3 |
| 132 |
"nominal_chirp.2.nom_chirp_phs" |
Float |
4 |
4 nominal chirp phase coefficients (record 2) |
cycles,Hz,Hz/s,Hz/s2 |
| 133 |
"nominal_chirp.3.nom_chirp_amp" |
Float |
4 |
4 nominal chirp amplitude coefficients (record 3) |
-, s-1, s-2, s-3 |
| 134 |
"nominal_chirp.3.nom_chirp_phs" |
Float |
4 |
4 nominal chirp phase coefficients (record 3) |
cycles,Hz,Hz/s,Hz/s2 |
| 135 |
"nominal_chirp.4.nom_chirp_amp" |
Float |
4 |
4 nominal chirp amplitude coefficients (record 4) |
-, s-1, s-2, s-3 |
| 136 |
"nominal_chirp.4.nom_chirp_phs" |
Float |
4 |
4 nominal chirp phase coefficients (record 4) |
cycles,Hz,Hz/s,Hz/s2 |
| 137 |
"nominal_chirp.5.nom_chirp_amp" |
Float |
4 |
4 nominal chirp amplitude coefficients (record 5) |
-, s-1, s-2, s-3 |
| 138 |
"nominal_chirp.5.nom_chirp_phs" |
Float |
4 |
4 nominal chirp phase coefficients (record 5) |
cycles,Hz,Hz/s,Hz/s2 |
| 139 |
"spare_7" |
Spare |
1 |
Spare |
- |
| 140 |
"num_lines_proc" |
ULong |
1 |
Number of input lines processed |
lines |
| 141 |
"num_look_az" |
UShort |
1 |
Number of Azimuth Looks |
looks |
| 142 |
"look_bw_az" |
Float |
1 |
Azimuth Look Bandwidth (null to null) -- this is the nominal value only for GM, WS, and AP. |
Hz |
| 143 |
"to_bw_az" |
Float |
1 |
Processed Azimuth bandwidth (null to null) -- this field is used only for IM products and WV imagettes. Filled
with zeros otherwise. |
Hz |
| 144 |
"filter_az" |
String |
1 |
Matched filter window type:HAMMING or KAISERØ or NONEØØØ |
ascii |
| 145 |
"filter_coef_az" |
Float |
1 |
Window coefficient for azimuth-matched filter |
- |
| 146 |
"az_fm_rate" |
Float |
3 |
3 co-efficients for Azimuth FM rate:Azimuth FM rate = C0 + C1(tSR-t0) + C2(tSR - t0)2tSR = 2 way slant range
time |
Hz/sHz/s2Hz/s3 |
| 147 |
"ax_fm_origin" |
Float |
1 |
2 way slant range time origin (t0) for Azimuth FM rate calculation |
ns |
| 148 |
"dop_amb_conf" |
Float |
1 |
Doppler Centroid Ambiguity Confidence MeasureValue between 0 and 1, 0 = poorest confidence, 1= highest
confidence |
- |
| 149 |
"spare_8" |
Spare |
1 |
Spare |
- |
| 150 |
"calibration_factors.1.proc_scaling_fact" |
Float |
1 |
Processor scaling factor (record 1) |
- |
| 151 |
"calibration_factors.1.ext_cal_fact" |
Float |
1 |
External Calibration Scaling Factor (mode/swath/polarization dependent) (record 1) |
- |
| 152 |
"calibration_factors.2.proc_scaling_fact" |
Float |
1 |
Processor scaling factor (record 2) |
- |
| 153 |
"calibration_factors.2.ext_cal_fact" |
Float |
1 |
External Calibration Scaling Factor (mode/swath/polarization dependent) (record 2) |
- |
| 154 |
"noise_estimation.noise_power_corr" |
Float |
5 |
Noise power correction factors |
- |
| 155 |
"noise_estimation.num_noise_lines" |
ULong |
5 |
Number of noise lines used to calculate factors |
- |
| 156 |
"spare_9" |
Spare |
1 |
Spare |
- |
| 157 |
"spare_10" |
Spare |
1 |
Spare |
- |
| 158 |
"output_statistics.1.out_mean" |
Float |
1 |
Output data mean Magnitude for detected products, real sample mean for SLC products (record 1) |
- |
| 159 |
"output_statistics.1.out_imag_mean" |
Float |
1 |
Output imaginary data mean Used for SLC products only (set to zero otherwise) (record 1) |
- |
| 160 |
"output_statistics.1.out_std_dev" |
Float |
1 |
Output data standard deviation Magnitude std. dev. for detected products, real sample std. dev. for SLC products
(record 1) |
- |
| 161 |
"output_statistics.1.out_imag_std_dev" |
Float |
1 |
Output imaginary data standard deviation Used for SLC products only (set to zero otherwise) (record 1) |
- |
| 162 |
"output_statistics.2.out_mean" |
Float |
1 |
Output data mean Magnitude for detected products, real sample mean for SLC products (record 2) |
- |
| 163 |
"output_statistics.2.out_imag_mean" |
Float |
1 |
Output imaginary data mean Used for SLC products only (set to zero otherwise) (record 2) |
- |
| 164 |
"output_statistics.2.out_std_dev" |
Float |
1 |
Output data standard deviation Magnitude std. dev. for detected products, real sample std. dev. for SLC products
(record 2) |
- |
| 165 |
"output_statistics.2.out_imag_std_dev" |
Float |
1 |
Output imaginary data standard deviation Used for SLC products only (set to zero otherwise) (record 2) |
- |
| 166 |
"spare_11" |
Spare |
1 |
Spare |
- |
| 167 |
"echo_comp" |
String |
1 |
Compression Method used for echo samples FBAQ, S&MØ, NONE |
ascii |
| 168 |
"echo_comp_ratio" |
String |
1 |
Compression Ratio for echo samples8/4, 8/3, 8/2, or 8/8 |
ascii |
| 169 |
"init_cal_comp" |
String |
1 |
Compression Method used for initial calibration samples FBAQ, S&MØ, NONE |
ascii |
| 170 |
"init_cal_ratio" |
String |
1 |
Compression Ratio for initial calibration samples8/4, 8/3, 8/2, or 8/8 |
ascii |
| 171 |
"per_cal_comp" |
String |
1 |
Compression Method used for periodic calibration samples FBAQ, S&MØ, NONE |
ascii |
| 172 |
"per_cal_ratio" |
String |
1 |
Compression Ratio for periodic calibration samples8/4, 8/3, 8/2, or 8/8 |
ascii |
| 173 |
"noise_comp" |
String |
1 |
Compression Method used for noise samples FBAQ, S&MØ, NONE |
ascii |
| 174 |
"noise_comp_ratio" |
String |
1 |
Compression Ratio for noise samples8/4, 8/3, 8/2, or 8/8 |
ascii |
| 175 |
"spare_12" |
Spare |
1 |
Spare |
- |
| 176 |
"beam_overlap" |
ULong |
4 |
Number of slant range samples in beam overlap(1-2, 2-3, 3-4, 4-5) |
- |
| 177 |
"lines_per_burst" |
ULong |
5 |
Number of lines per burst for this image 5 values for beams SS1 to SS5 in WS and GM modes.One value for AP mode,
all others set to zero. |
lines |
| 178 |
"spare_13" |
Spare |
1 |
Spare |
- |
| 179 |
"orbit_state_vectors.1.state_vect_time_1" |
MJD |
1 |
Time of state vector (record 1) |
MJD |
| 180 |
"orbit_state_vectors.1.x_pos_1" |
SLong |
1 |
X position in Earth fixed reference frame (record 1) |
10 -2m |
| 181 |
"orbit_state_vectors.1.y_pos_1" |
SLong |
1 |
Y position in Earth fixed reference frame (record 1) |
10 -2m |
| 182 |
"orbit_state_vectors.1.z_pos_1" |
SLong |
1 |
Z position in Earth fixed reference frame (record 1) |
10 -2m |
| 183 |
"orbit_state_vectors.1.x_vel_1" |
SLong |
1 |
X velocity relative to Earth fixed reference frame (record 1) |
10 -5m/s |
| 184 |
"orbit_state_vectors.1.y_vel_1" |
SLong |
1 |
Y velocity relative to Earth fixed reference frame (record 1) |
10 -5m/s |
| 185 |
"orbit_state_vectors.1.z_vel_1" |
SLong |
1 |
Z velocity relative to Earth fixed reference frame (record 1) |
10 -5m/s |
| 186 |
"orbit_state_vectors.2.state_vect_time_1" |
MJD |
1 |
Time of state vector (record 2) |
MJD |
| 187 |
"orbit_state_vectors.2.x_pos_1" |
SLong |
1 |
X position in Earth fixed reference frame (record 2) |
10 -2m |
| 188 |
"orbit_state_vectors.2.y_pos_1" |
SLong |
1 |
Y position in Earth fixed reference frame (record 2) |
10 -2m |
| 189 |
"orbit_state_vectors.2.z_pos_1" |
SLong |
1 |
Z position in Earth fixed reference frame (record 2) |
10 -2m |
| 190 |
"orbit_state_vectors.2.x_vel_1" |
SLong |
1 |
X velocity relative to Earth fixed reference frame (record 2) |
10 -5m/s |
| 191 |
"orbit_state_vectors.2.y_vel_1" |
SLong |
1 |
Y velocity relative to Earth fixed reference frame (record 2) |
10 -5m/s |
| 192 |
"orbit_state_vectors.2.z_vel_1" |
SLong |
1 |
Z velocity relative to Earth fixed reference frame (record 2) |
10 -5m/s |
| 193 |
"orbit_state_vectors.3.state_vect_time_1" |
MJD |
1 |
Time of state vector (record 3) |
MJD |
| 194 |
"orbit_state_vectors.3.x_pos_1" |
SLong |
1 |
X position in Earth fixed reference frame (record 3) |
10 -2m |
| 195 |
"orbit_state_vectors.3.y_pos_1" |
SLong |
1 |
Y position in Earth fixed reference frame (record 3) |
10 -2m |
| 196 |
"orbit_state_vectors.3.z_pos_1" |
SLong |
1 |
Z position in Earth fixed reference frame (record 3) |
10 -2m |
| 197 |
"orbit_state_vectors.3.x_vel_1" |
SLong |
1 |
X velocity relative to Earth fixed reference frame (record 3) |
10 -5m/s |
| 198 |
"orbit_state_vectors.3.y_vel_1" |
SLong |
1 |
Y velocity relative to Earth fixed reference frame (record 3) |
10 -5m/s |
| 199 |
"orbit_state_vectors.3.z_vel_1" |
SLong |
1 |
Z velocity relative to Earth fixed reference frame (record 3) |
10 -5m/s |
| 200 |
"orbit_state_vectors.4.state_vect_time_1" |
MJD |
1 |
Time of state vector (record 4) |
MJD |
| 201 |
"orbit_state_vectors.4.x_pos_1" |
SLong |
1 |
X position in Earth fixed reference frame (record 4) |
10 -2m |
| 202 |
"orbit_state_vectors.4.y_pos_1" |
SLong |
1 |
Y position in Earth fixed reference frame (record 4) |
10 -2m |
| 203 |
"orbit_state_vectors.4.z_pos_1" |
SLong |
1 |
Z position in Earth fixed reference frame (record 4) |
10 -2m |
| 204 |
"orbit_state_vectors.4.x_vel_1" |
SLong |
1 |
X velocity relative to Earth fixed reference frame (record 4) |
10 -5m/s |
| 205 |
"orbit_state_vectors.4.y_vel_1" |
SLong |
1 |
Y velocity relative to Earth fixed reference frame (record 4) |
10 -5m/s |
| 206 |
"orbit_state_vectors.4.z_vel_1" |
SLong |
1 |
Z velocity relative to Earth fixed reference frame (record 4) |
10 -5m/s |
| 207 |
"orbit_state_vectors.5.state_vect_time_1" |
MJD |
1 |
Time of state vector (record 5) |
MJD |
| 208 |
"orbit_state_vectors.5.x_pos_1" |
SLong |
1 |
X position in Earth fixed reference frame (record 5) |
10 -2m |
| 209 |
"orbit_state_vectors.5.y_pos_1" |
SLong |
1 |
Y position in Earth fixed reference frame (record 5) |
10 -2m |
| 210 |
"orbit_state_vectors.5.z_pos_1" |
SLong |
1 |
Z position in Earth fixed reference frame (record 5) |
10 -2m |
| 211 |
"orbit_state_vectors.5.x_vel_1" |
SLong |
1 |
X velocity relative to Earth fixed reference frame (record 5) |
10 -5m/s |
| 212 |
"orbit_state_vectors.5.y_vel_1" |
SLong |
1 |
Y velocity relative to Earth fixed reference frame (record 5) |
10 -5m/s |
| 213 |
"orbit_state_vectors.5.z_vel_1" |
SLong |
1 |
Z velocity relative to Earth fixed reference frame (record 5) |
10 -5m/s |
| 214 |
"spare_14" |
Spare |
1 |
Spare |
- |
| 215 |
"slant_range_time" |
Float |
1 |
2-way slant range time origin (t0) |
ns |
| 216 |
"dop_coef" |
Float |
5 |
Doppler centroid coefficients as a function of slant range time: D0, D1, D2, D3, and D4.where Doppler Centroid =
D0 + D1(tSR-t0) + D2(tSR-t0)2 + D3(tSR-t0)3 + D4(tSR-t0)4 |
HzHz/sHz/s2Hz/s3Hz/s4 |
| 217 |
"dop_conf" |
Float |
1 |
Doppler Centroid Confidence MeasureValue between 0 and 1, 0 = poorest confidence, 1= highest confidence |
- |
| 218 |
"spare_15" |
Spare |
1 |
Spare |
- |
| 219 |
"chirp_width" |
Float |
1 |
3-dB pulse width of chirp replica cross-correlation function between extract chirp and nominal chirp |
samples |
| 220 |
"chirp_sidelobe" |
Float |
1 |
First side lobe level of chirp replica cross-correlation function between reconstructed chirp and nominal
chirp |
dB |
| 221 |
"chirp_islr" |
Float |
1 |
ISLR of chirp replica cross-correlation function between reconstructed chirp and nominal chirp |
dB |
| 222 |
"chirp_peak_loc" |
Float |
1 |
Peak location of cross-correlation function between reconstructed chirp and nominal chirp |
samples |
| 223 |
"chirp_power" |
Float |
1 |
Chirp power |
- |
| 224 |
"elev_corr_factor" |
Float |
1 |
Elevation gain correction scaling factor applied to range compressed samples |
- |
| 225 |
"spare_16" |
Spare |
1 |
Spare |
- |
| 226 |
"cal_info.1.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 1) |
- |
| 227 |
"cal_info.1.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 1) |
- |
| 228 |
"cal_info.1.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 1) |
- |
| 229 |
"cal_info.1.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 1) |
degrees |
| 230 |
"cal_info.2.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 2) |
- |
| 231 |
"cal_info.2.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 2) |
- |
| 232 |
"cal_info.2.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 2) |
- |
| 233 |
"cal_info.2.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 2) |
degrees |
| 234 |
"cal_info.3.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 3) |
- |
| 235 |
"cal_info.3.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 3) |
- |
| 236 |
"cal_info.3.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 3) |
- |
| 237 |
"cal_info.3.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 3) |
degrees |
| 238 |
"cal_info.4.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 4) |
- |
| 239 |
"cal_info.4.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 4) |
- |
| 240 |
"cal_info.4.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 4) |
- |
| 241 |
"cal_info.4.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 4) |
degrees |
| 242 |
"cal_info.5.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 5) |
- |
| 243 |
"cal_info.5.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 5) |
- |
| 244 |
"cal_info.5.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 5) |
- |
| 245 |
"cal_info.5.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 5) |
degrees |
| 246 |
"cal_info.6.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 6) |
- |
| 247 |
"cal_info.6.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 6) |
- |
| 248 |
"cal_info.6.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 6) |
- |
| 249 |
"cal_info.6.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 6) |
degrees |
| 250 |
"cal_info.7.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 7) |
- |
| 251 |
"cal_info.7.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 7) |
- |
| 252 |
"cal_info.7.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 7) |
- |
| 253 |
"cal_info.7.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 7) |
degrees |
| 254 |
"cal_info.8.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 8) |
- |
| 255 |
"cal_info.8.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 8) |
- |
| 256 |
"cal_info.8.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 8) |
- |
| 257 |
"cal_info.8.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 8) |
degrees |
| 258 |
"cal_info.9.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 9) |
- |
| 259 |
"cal_info.9.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 9) |
- |
| 260 |
"cal_info.9.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 9) |
- |
| 261 |
"cal_info.9.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 9) |
degrees |
| 262 |
"cal_info.10.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 10) |
- |
| 263 |
"cal_info.10.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 10) |
- |
| 264 |
"cal_info.10.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 10) |
- |
| 265 |
"cal_info.10.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 10) |
degrees |
| 266 |
"cal_info.11.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 11) |
- |
| 267 |
"cal_info.11.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 11) |
- |
| 268 |
"cal_info.11.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 11) |
- |
| 269 |
"cal_info.11.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 11) |
degrees |
| 270 |
"cal_info.12.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 12) |
- |
| 271 |
"cal_info.12.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 12) |
- |
| 272 |
"cal_info.12.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 12) |
- |
| 273 |
"cal_info.12.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 12) |
degrees |
| 274 |
"cal_info.13.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 13) |
- |
| 275 |
"cal_info.13.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 13) |
- |
| 276 |
"cal_info.13.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 13) |
- |
| 277 |
"cal_info.13.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 13) |
degrees |
| 278 |
"cal_info.14.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 14) |
- |
| 279 |
"cal_info.14.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 14) |
- |
| 280 |
"cal_info.14.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 14) |
- |
| 281 |
"cal_info.14.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 14) |
degrees |
| 282 |
"cal_info.15.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 15) |
- |
| 283 |
"cal_info.15.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 15) |
- |
| 284 |
"cal_info.15.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 15) |
- |
| 285 |
"cal_info.15.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 15) |
degrees |
| 286 |
"cal_info.16.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 16) |
- |
| 287 |
"cal_info.16.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 16) |
- |
| 288 |
"cal_info.16.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 16) |
- |
| 289 |
"cal_info.16.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 16) |
degrees |
| 290 |
"cal_info.17.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 17) |
- |
| 291 |
"cal_info.17.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 17) |
- |
| 292 |
"cal_info.17.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 17) |
- |
| 293 |
"cal_info.17.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 17) |
degrees |
| 294 |
"cal_info.18.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 18) |
- |
| 295 |
"cal_info.18.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 18) |
- |
| 296 |
"cal_info.18.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 18) |
- |
| 297 |
"cal_info.18.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 18) |
degrees |
| 298 |
"cal_info.19.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 19) |
- |
| 299 |
"cal_info.19.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 19) |
- |
| 300 |
"cal_info.19.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 19) |
- |
| 301 |
"cal_info.19.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 19) |
degrees |
| 302 |
"cal_info.20.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 20) |
- |
| 303 |
"cal_info.20.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 20) |
- |
| 304 |
"cal_info.20.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 20) |
- |
| 305 |
"cal_info.20.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 20) |
degrees |
| 306 |
"cal_info.21.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 21) |
- |
| 307 |
"cal_info.21.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 21) |
- |
| 308 |
"cal_info.21.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 21) |
- |
| 309 |
"cal_info.21.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 21) |
degrees |
| 310 |
"cal_info.22.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 22) |
- |
| 311 |
"cal_info.22.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 22) |
- |
| 312 |
"cal_info.22.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 22) |
- |
| 313 |
"cal_info.22.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 22) |
degrees |
| 314 |
"cal_info.23.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 23) |
- |
| 315 |
"cal_info.23.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 23) |
- |
| 316 |
"cal_info.23.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 23) |
- |
| 317 |
"cal_info.23.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 23) |
degrees |
| 318 |
"cal_info.24.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 24) |
- |
| 319 |
"cal_info.24.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 24) |
- |
| 320 |
"cal_info.24.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 24) |
- |
| 321 |
"cal_info.24.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 24) |
degrees |
| 322 |
"cal_info.25.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 25) |
- |
| 323 |
"cal_info.25.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 25) |
- |
| 324 |
"cal_info.25.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 25) |
- |
| 325 |
"cal_info.25.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 25) |
degrees |
| 326 |
"cal_info.26.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 26) |
- |
| 327 |
"cal_info.26.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 26) |
- |
| 328 |
"cal_info.26.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 26) |
- |
| 329 |
"cal_info.26.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 26) |
degrees |
| 330 |
"cal_info.27.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 27) |
- |
| 331 |
"cal_info.27.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 27) |
- |
| 332 |
"cal_info.27.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 27) |
- |
| 333 |
"cal_info.27.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 27) |
degrees |
| 334 |
"cal_info.28.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 28) |
- |
| 335 |
"cal_info.28.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 28) |
- |
| 336 |
"cal_info.28.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 28) |
- |
| 337 |
"cal_info.28.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 28) |
degrees |
| 338 |
"cal_info.29.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 29) |
- |
| 339 |
"cal_info.29.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 29) |
- |
| 340 |
"cal_info.29.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 29) |
- |
| 341 |
"cal_info.29.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 29) |
degrees |
| 342 |
"cal_info.30.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 30) |
- |
| 343 |
"cal_info.30.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 30) |
- |
| 344 |
"cal_info.30.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 30) |
- |
| 345 |
"cal_info.30.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 30) |
degrees |
| 346 |
"cal_info.31.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 31) |
- |
| 347 |
"cal_info.31.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 31) |
- |
| 348 |
"cal_info.31.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 31) |
- |
| 349 |
"cal_info.31.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 31) |
degrees |
| 350 |
"cal_info.32.max_cal" |
Float |
3 |
Max of Cal pulses 1, 2, and 3 amplitude (record 32) |
- |
| 351 |
"cal_info.32.avg_cal" |
Float |
3 |
Average of Cal pulse 1, 2, and 3 amplitude over the 3 dB on either side of the max amplitude (record 32) |
- |
| 352 |
"cal_info.32.avg_val_1a" |
Float |
1 |
Average of Cal pulse 1A over the sample window (record 32) |
- |
| 353 |
"cal_info.32.phs_cal" |
Float |
4 |
Extracted phase for calibration pulse 1, 1A, 2, and 3 (record 32) |
degrees |
| 354 |
"spare_17" |
Spare |
1 |
Spare |
- |
| 355 |
"first_line_time" |
MJD |
1 |
Zero Doppler Time at first line of imagette |
MJD |
| 356 |
"first_line_tie_points.range_samp_nums_first" |
ULong |
3 |
Range sample number Gives the range location of the grid points. First range sample is 1, is M (includes zero
filled samples) |
- |
| 357 |
"first_line_tie_points.slant_range_times_first" |
Float |
3 |
2 way slant range time to range sample |
ns |
| 358 |
"first_line_tie_points.inc_angles_first" |
Float |
3 |
Incidence Angle at range sample |
deg. |
| 359 |
"first_line_tie_points.lats_first" |
SLong |
3 |
geodetic latitude of range sample (positive north) |
(1e-6) degrees |
| 360 |
"first_line_tie_points.longs_first" |
SLong |
3 |
geodetic longitude of range sample (positive east) |
(1e-6) degrees |
| 361 |
"mid_line_time" |
MJD |
1 |
Zero Doppler Time at centre line of imagette |
MJD |
| 362 |
"mid_range_line_nums" |
ULong |
1 |
Range line number of the center range line |
- |
| 363 |
"mid_line_tie_points.range_samp_nums_mid" |
ULong |
3 |
Range sample number Gives the range location of the grid points. First range sample is 1, is M (includes zero
filled samples) |
- |
| 364 |
"mid_line_tie_points.slant_range_times_mid" |
Float |
3 |
2 way slant range time to range sample |
ns |
| 365 |
"mid_line_tie_points.inc_angles_mid" |
Float |
3 |
Incidence Angle at range sample |
deg. |
| 366 |
"mid_line_tie_points.lats_mid" |
SLong |
3 |
geodetic latitude of range sample (positive north) |
(1e-6) degrees |
| 367 |
"mid_line_tie_points.longs_mid" |
SLong |
3 |
geodetic longitude of range sample (positive east) |
(1e-6) degrees |
| 368 |
"last_line_time" |
MJD |
1 |
Zero Doppler Time at last line of imagette |
MJD |
| 369 |
"last_line_num" |
ULong |
1 |
Range line number of the last range line |
- |
| 370 |
"last_line_tie_points.range_samp_nums_last" |
ULong |
3 |
Range sample number Gives the range location of the grid points. First range sample is 1, is M (includes zero
filled samples) |
- |
| 371 |
"last_line_tie_points.slant_range_times_last" |
Float |
3 |
2 way slant range time to range sample |
ns |
| 372 |
"last_line_tie_points.inc_angles_last" |
Float |
3 |
Incidence Angle at range sample |
deg. |
| 373 |
"last_line_tie_points.lats_last" |
SLong |
3 |
geodetic latitude of range sample (positive north) |
(1e-6) degrees |
| 374 |
"last_line_tie_points.longs_last" |
SLong |
3 |
geodetic longitude of range sample (positive east) |
(1e-6) degrees |
| 375 |
"swst_offset" |
Float |
1 |
Wave cell SWST offset from center of the sub-swath to start of imagette. 208 ns increments |
ns |
| 376 |
"ground_range_bias" |
Float |
1 |
Wave cell Ground range bias from centre of the Sub-Swath to the centre of the imagette (Ground range, km) |
km |
| 377 |
"elev_angle_bias" |
Float |
1 |
Wave cell Elevation angle biasfrom centre of the Sub-Swath elevation to the centre of the imagette (deg) |
deg |
| 378 |
"imagette_range_len" |
Float |
1 |
Imagette length in range (m) |
m |
| 379 |
"imagette_az_len" |
Float |
1 |
Imagette length in azimuth (m) |
m |
| 380 |
"imagette_range_res" |
Float |
1 |
Nominal Imagette resolution in slant range (m) |
m |
| 381 |
"ground_res" |
Float |
1 |
Nominal resolution in ground range |
m |
| 382 |
"imagette_az_res" |
Float |
1 |
Nominal Imagette resolution in azimuth (m) |
m |
| 383 |
"platform_alt" |
Float |
1 |
Altitude (platform to ellipsoid) in metres (centre of wave cell) |
m |
| 384 |
"platform_vel" |
Float |
1 |
Platform Velocity (m/s)w.r.t moving earth |
m/s |
| 385 |
"slant_range" |
Float |
1 |
Range to centre of imagette (m)from platform to target |
m |
| 386 |
"cw_drift" |
Float |
1 |
CW signal drift |
- |
| 387 |
"wave_subcycle" |
UShort |
1 |
Wave sub-cycle (1 or 2) of this wave cell |
- |
| 388 |
"earth_radius" |
Float |
1 |
Earth Radius at imagette center sample |
m |
| 389 |
"sat_height" |
Float |
1 |
Satellite distance to earth center |
m |
| 390 |
"first_sample_slant_range" |
Float |
1 |
Distance from satellite to first range pixel in the full SLC image |
m |
| 391 |
"spare_18" |
Spare |
1 |
Spare |
- |
| 392 |
"elevation_pattern.slant_range_time" |
Float |
11 |
2 way slant range times |
ns |
| 393 |
"elevation_pattern.elevation_angles" |
Float |
11 |
Corresponding elevation angles |
degrees |
| 394 |
"elevation_pattern.antenna_pattern" |
Float |
11 |
Corresponding two-way antenna elevation pattern values |
dB |
| 395 |
"spare_19" |
Spare |
1 |
Spare |
- |
